TRUF BEARINGS LIMITED

NTN canada Bearing

 

Cam Follower and Track Roller - Stud Type

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.

 

 

Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

 

 

 

 

SMITH CR-1-B-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-1-B-SS Cam Follower and Track Roller - Stud Type
6.65 kN
5.5 Nm
SMITH CR-3/4-B-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-3/4-B-SS Cam Follower and Track Roller - Stud Type
Deep Groove Ball Bea
Single
SMITH CR-5/8-B-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-5/8-B-SS Cam Follower and Track Roller - Stud Type
0.37 Hz
4.43 Hz
SMITH CR-1/2-B-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-1/2-B-SS Cam Follower and Track Roller - Stud Type
No
Bearing Steel
SMITH CR-2-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-2-SS Cam Follower and Track Roller - Stud Type
12
DB
SMITH CR-1-1/2-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-1-1/2-SS Cam Follower and Track Roller - Stud Type
With Outer Ring
Ball
SMITH CR-7/8-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-7/8-SS Cam Follower and Track Roller - Stud Type
0.945 Inch | 24 Mill
NTN
SMITH CR-1-1/8-SS  Cam Follower and Track Roller - Stud Type
SMITH CR-1-1/8-SS Cam Follower and Track Roller - Stud Type
Double
7 Days
Next ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Flange Block Bearings
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
Precision Ball Bearings
Self Aligning Ball Bearings
Single Row Ball Bearings
Sleeve Bearings